July 9, 2008

OK, rather than run down into the shop and start working on whatever I bump into, I’m compiling a list, by guitar of what to tackle next.

  1. Bend the side waist tighter using bending iron
  2. Cut sides
  3. Glue in butt block after checking square, dimensions, and radius
  4. Glue in neck block after checking dimensions and recording distance between holes in mortise
  5. Trim down the spreaders
  6. Make a rosette jig
  7. Cut the rosette channels, use teflon strips, remove, install abalone, flood with super glue.  Don’t forget the vinyl sealer