Guitar 1002 – Bracing Installed
June 16, 2011
All back bracing and top bracing/tonebars have been installed (glued and clamped).
The braces have been pre-shaped for minimal chiseling. After further shaping, and feathering the ends down toward the edges, I will install an x-brace patch over the joint, then sand.
The bridge plate will finally be installed prior to joining back, sides and top.
Larry on 16 Jun 2011 at 8:07 pm #
It looks like a guitar for Spongebob Square Pants . . . kind of boxy shaped . . . ?