Guitar 1002 – Bracing Continues
June 12, 2011
I have begun the process of finger planing/shaping the back braces. I’m also 75% complete on gluing/clamping all the top braces. I’m heavily preshaping the top braces as my past experience has been that this is a more efficient method than planing/shaping after the braces have been installed.
The owner of 1001 dropped by to request a tweak. His open A string had the dreaded wolf-tone which was really a small gap underneath the nut on the fretboard side. A simple filing of the nut slot to release the gap fixed the problem.
I’m also continuing to apply lacquer filler to the headstock for the 12 string Ovation repair. I’ve reattached the sheared headstock, repaired are relacquered the truss rod cover, and after the lacquer filler cures I’ll spray several coats of touch up lacquer then sand and buff. It should be ready later next week. I would like to get this back to the customer before we head out to Alaska for our RV adventure.