Uke 1001 – Wrapped Up and Ready to Play

January 18, 2012

It’s a snow day, a day before my son’s 19th birthday, and the birth of my second uke.  The finish is KTM9, a water based lacquer which I believe I will continue to use for future instrument finishes.  I took several months to apply, knockdown and buff the finish, and I believe it improved the results.  Also, 24 or more very thin coats proved to be the right approach.  I avoided drips and orange peel effect, and the knockdown was more straightforward.

120118finished

There’s nothing like a fire, dog and uke to complete a snow day at home.

Uke 1001 – Home Stretch

January 15, 2012

Tomorrow this uke will be making music.  The finish is all knocked down and polished, and today I mounted the bridge.  After setting overnight it will be a quick transition to get the strings installed.

120115bridgemount

Uke Lacquer – Uke Cure – Myrtle Join

November 6, 2011

Devin dropped by today and we polished up his frets, nut, saddle, and installed a pickguard.  Looks like it’s really done.

I’ve been applying lacquer to the Bubinga Uke and the Koa Uke.  The Bubinga is fully lacquered and is sitting in cure mode for a couple of more weeks.

111106curing

The Koa uke has 16 coats, and I think 24 will be the cat’s pajamas.  I should be able to get the 24 applied by Tuesday evening.

111106coat16

Between lacquer applications (wait one hour please) I’ve been bracing the Myrtle Parlor (for Rachel) and I joined the back plates.

111106myrtlejoin

111106myrtlejoint

I’m liking this myrtle, and it seems like it will be nice to work on.  It planed easily while preparing the plate joint.

Uke Lacquer – Fretboard Markers – Lava Light

November 30, 2011

Let’s start with the Lava Light.

111030lavalight

After William left for UW, several items which I coveted were left behind.  Lava Light (or Lamp)!

I mapped out a schedule for the completion of Uke 1101, and it is possible to complete before I go to Salt Lake for Thanksgiving.  It will be a bit tricky to continue working on the uke while the lacquer is curing.  Today, I finished the 8th coat of lacquer, with an intention of putting on 20 coats.  Tomorrow I’ll add 4 more coats.  Coincidentally, I am adding coats to the Bubinga uke, and after tomorrow’s application, it will have 24 coats.

111030backlacquer

This is the back of the Bubinga.

111030toplacquered

111030headlacquer

Between coats I attached the fret markers to the Hybrid’s fretboard and the Thorn and Vine to 1202 (Bob).  The shell is glued to the surface with white glue.  I will score a border around the glued shell, then pop off the shell in preparation for routing a channel.

111030thornandvine