sMg Guitars

May 12, 2008

Sunday, good day to work on a guitar.  Finally finished setting the pearl dots (even though they may not be entirely centered) and filled one depressed dot with epoxy, sanded to a baby soft smooth surface.  Used the Kinkaid recommended method of installing frets by first wetting the fret slot, dribbling in some yellow glue and banging them in, ends first, then working toward center.  I must say they went in much cleaner than the last attempt.  Snipped them back after some time curing, and dribbled black superglue into the exposed slots on the side of the fretboard.  Ready now to file down smooth against the fretboard sides, then taper each fret in preparation for top filing and recrowning.  I may take a break from the recrowning and start in on finish sanding the body and neck in preparation for finish.  Ooooh, I’m almost there.

May 9, 2008

Aside from the fact that I have joined the Guild of American Luthiers (http://www.luth.org/index.html) I have placed an order for my official guitar headstock logo. This makes it official, I am a Luthier.

May 7, 2008

My good friend Larry, who commissioned guitar 003, took the bold step of getting one of his customers to commission a guitar.  I’m excited, and it appears that I will have the exclusive decision making process in what to build.  Larry and I will brainstorm this weekend.  This may be the impetous to venture to another style, most likely, dreadnought.

May 6, 2008

Three boxes on the stoop from LMI. Two contained the almost complete contents for Larry’s LMI Maple OM. The kit wizard is a great way to build your own inventory of components for the guitar to be built, but there’s so many places to go wrong, I think we missed a few things and ordered some superfluous stuff as well. What’s missing is a rosewood heel cap, rosewood binding for the fretboard, fretboard MOP dots in black, and whatever we decide is needed to augment the rosette (we only ordered a single lacewood ring). While upacking I was concerned that there wasn’t enough stuff. Alas, it’s all there. And the largest item was the maple neckblock, immensly heavy and enough raw material to make two necks and neck blocks to boot.

May 4, 2008

Larry is interested in wild colors for his guitar.  We ordered concentrated stains from Stewart MacDonald including Bright Green.  With a Maple back and sides and neck, he’s thinking a green mix with mahogany red or tobacco brown may give him the tint he’s looking for.  We’ll do some mixing and staining on maple scraps to test our thoughts.  He also located a wild green abalone pickguard on eBay which we can match up against the test stains.

May 4, 2008

Had a real good session yesterday, made grand progress. I set the neck, bolted on rather, and glued on the fretboard. Sanded and rasped the headstock, neck where it joins the fretboard, and it’s really looking nice. There is a slight bow to the fretboard starting where it meets the body and moves toward the rosette. This is due to a minor difference in the neck angle vs. the top of the body. I think this is acceptable, but will realize the problem’s significance only when I get the bridge on and the frets levelled.

Used my new drill press to drill the holes for the fretboard MOP dots. First thing I did was to drill the 5th fret dot slightly off center. How could I have done that? I measured, levelled, used masking tape with a whole bunch of guide lines, measured again, yet I still got it wrong. RATS. Maybe I’ll put a 1/4″ dot there which I will be able to center (Larger dot, centered will consume the smaller off center hole). Hmm, yeah, that’s what I’ll do.

Continue Reading »